/usr/lib64/erlang/lib/parsetools-2.3.2/src/ Current File: //usr/lib64/erlang/lib/parsetools-2.3.2/src/leex.erl
%% Copyright (c) 2008,2009 Robert Virding. All rights reserved.
%%
%% Redistribution and use in source and binary forms, with or without
%% modification, are permitted provided that the following conditions
%% are met:
%%
%% 1. Redistributions of source code must retain the above copyright
%% notice, this list of conditions and the following disclaimer.
%% 2. Redistributions in binary form must reproduce the above copyright
%% notice, this list of conditions and the following disclaimer in the
%% documentation and/or other materials provided with the distribution.
%%
%% THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
%% "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
%% LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
%% FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
%% COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
%% INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
%% BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
%% LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
%% CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
%% LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
%% ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
%% POSSIBILITY OF SUCH DAMAGE.

%%% A Lexical Analyser Generator for Erlang.
%%%
%%% Most of the algorithms used here are taken pretty much as
%%% described in the "Dragon Book" by Aho, Sethi and Ullman. Some
%%% completing details were taken from "Compiler Design in C" by
%%% Hollub.

-module(leex).

-export([compile/3,file/1,file/2,format_error/1]).

-import(lists, [member/2,reverse/1,sort/1,keysort/2,
                map/2,foldl/3,foldr/3,foreach/2,flatmap/2]).
-import(ordsets, [is_element/2,add_element/2,union/2]).
-import(orddict, [store/3]).

-include("erl_compile.hrl").
%%-include_lib("stdlib/include/erl_compile.hrl").

-define(LEEXINC, "leexinc.hrl").        % Include file
-define(LEEXLIB, parsetools).           % Leex is in lib parsetools
%%-define(LEEXLIB, leex).               % Leex is in lib leex

-define(DEFS_HEAD, "Definitions.").
-define(RULE_HEAD, "Rules.").
-define(CODE_HEAD, "Erlang code.").

-record(leex, {xfile=[],        % Xrl file
               efile=[],        % Erl file
               ifile=[],        % Include file
               gfile=[],        % Graph file
               module,          % Module name
               opts=[],         % Options
               encoding=none,   % Encoding of Xrl file
               % posix=false,   % POSIX regular expressions
               errors=[],
               warnings=[]
              }).

-record(nfa_state, {no,edges=[],accept=noaccept}).
-record(dfa_state, {no,nfa=[],trans=[],accept=noaccept}).

%%%
%%% Exported functions
%%%

%%% Interface to erl_compile.

compile(Input0, Output0,
        #options{warning = WarnLevel, verbose=Verbose, includes=Includes,
		 specific=Specific}) ->
    Input = assure_extension(shorten_filename(Input0), ".xrl"),
    Output = assure_extension(shorten_filename(Output0), ".erl"),
    Includefile = lists:sublist(Includes, 1),
    Werror = proplists:get_bool(warnings_as_errors, Specific),
    Opts = [{scannerfile,Output},{includefile,Includefile},{verbose,Verbose},
            {report_errors,true},{report_warnings,WarnLevel > 0},
	    {warnings_as_errors, Werror}],
    case file(Input, Opts) of
        {ok, _} ->
            ok;
        error ->
            error
    end.

-type error_info() :: {erl_anno:line() | 'none',
                       module(), ErrorDescriptor :: term()}.
-type errors() :: [{file:filename(), [error_info()]}].
-type warnings() :: [{file:filename(), [error_info()]}].
-type ok_ret() :: {'ok', Scannerfile :: file:filename()}
                | {'ok', Scannerfile :: file:filename(), warnings()}.
-type error_ret() :: 'error'
                  | {'error', Errors :: errors(), Warnings :: warnings()}.
-type leex_ret() :: ok_ret() | error_ret().

-spec file(FileName) -> leex_ret() when
      FileName :: file:filename().

file(File) -> file(File, []).

-spec file(FileName, Options) -> leex_ret() when
      FileName :: file:filename(),
      Options :: Option | [Option],
      Option :: {'dfa_graph', boolean()}
              | {'includefile', Includefile :: file:filename()}
              | {'report_errors', boolean()}
              | {'report_warnings', boolean()}
              | {'report', boolean()}
              | {'return_errors', boolean()}
              | {'return_warnings', boolean()}
              | {'return', boolean()}
              | {'scannerfile', Scannerfile :: file:filename()}
              | {'verbose', boolean()}
              | {'warnings_as_errors', boolean()}
              | 'dfa_graph'
              | 'report_errors' | 'report_warnings' | 'report'
              | 'return_errors' | 'return_warnings' | 'return'
              | 'verbose' | 'warnings_as_errors'.

file(File, Opts0) when is_list(Opts0) ->
    case is_filename(File) of
        no -> erlang:error(badarg, [File,Opts0]);
        _ -> ok
    end,
    EnvOpts0 = env_default_opts(),
    EnvOpts = select_recognized_opts(EnvOpts0),
    Opts1 = Opts0 ++ EnvOpts,
    Opts = case options(Opts1) of
               badarg ->
                   erlang:error(badarg, [File,Opts0]);
               Options ->
                   Options
           end,
    St0 = #leex{},
    St1 = filenames(File, Opts, St0),   % Get all the filenames
    St = try
             {ok,REAs,Actions,Code,St2} = parse_file(St1),
             {DFA,DF} = make_dfa(REAs, St2),
             case werror(St2) of
                 false ->
                     St3 = out_file(St2, DFA, DF, Actions, Code),
                     case lists:member(dfa_graph, St3#leex.opts) of
                         true -> out_dfa_graph(St3, DFA, DF);
                         false -> St3
                     end;
                 true ->
                     St2
             end
         catch #leex{}=St4 ->
             St4
         end,
    leex_ret(St);
file(File, Opt) ->
    file(File, [Opt]).

-spec format_error(ErrorDescriptor) -> io_lib:chars() when
      ErrorDescriptor :: term().

format_error({file_error, Reason}) ->
    io_lib:fwrite("~ts",[file:format_error(Reason)]);
format_error(missing_defs) -> "missing Definitions";
format_error(missing_rules) -> "missing Rules";
format_error(missing_code) -> "missing Erlang code";
format_error(empty_rules) -> "no rules";
format_error(bad_rule) -> "bad rule";
format_error({regexp,E})->
    Es = case E of
             {interval_range,_} -> "interval range";
             {unterminated,Cs} ->
                 "unterminated " ++ Cs;
             {illegal_char,Cs} ->
                 "illegal character " ++ Cs;
%%           {posix_cc,What} ->
%%               ["illegal POSIX character class ",io_lib:write_string(What)];
             {char_class,What} ->
                 ["illegal character class ",io_lib:write_string(What)]
         end,
    ["bad regexp `",Es,"'"];
format_error(ignored_characters) ->
    "ignored characters";
format_error(cannot_parse) ->
    io_lib:fwrite("cannot parse; probably encoding mismatch", []).

%%%
%%% Local functions
%%%

assure_extension(File, Ext) ->
    lists:concat([strip_extension(File, Ext), Ext]).

%% Assumes File is a filename.
strip_extension(File, Ext) ->
    case filename:extension(File) of
        Ext -> filename:rootname(File);
        _Other -> File
    end.

%% Copied from compile.erl.
env_default_opts() ->
    Key = "ERL_COMPILER_OPTIONS",
    case os:getenv(Key) of
	false -> [];
	Str when is_list(Str) ->
	    case erl_scan:string(Str) of
		{ok,Tokens,_} ->
                    Dot = {dot, erl_anno:new(1)},
		    case erl_parse:parse_term(Tokens ++ [Dot]) of
			{ok,List} when is_list(List) -> List;
			{ok,Term} -> [Term];
			{error,_Reason} ->
			    io:format("Ignoring bad term in ~s\n", [Key]),
			    []
		    end;
		{error, {_,_,_Reason}, _} ->
		    io:format("Ignoring bad term in ~s\n", [Key]),
		    []
	    end
    end.

select_recognized_opts(Options0) ->
    Options = preprocess_options(Options0),
    AllOptions = all_options(),
    [Option ||
        {Name, _} = Option <- Options,
        lists:member(Name, AllOptions)].

options(Options0) ->
    Options1 = preprocess_options(Options0),
    AllOptions = all_options(),
    case check_options(Options1, AllOptions, []) of
        badarg ->
            badarg;
        OptionValues  ->
            AllOptionValues =
                [case lists:keyfind(Option, 1, OptionValues) of
                     false ->
                         {Option, default_option(Option)};
                     OptionValue ->
                         OptionValue
                 end || Option <- AllOptions],
            foldr(fun({_, false}, L) -> L;
                     ({Option, true}, L) -> [Option | L];
                     (OptionValue, L) -> [OptionValue | L]
                  end, [], AllOptionValues)
    end.

preprocess_options(Options) ->
    foldr(fun preproc_opt/2, [], Options).

preproc_opt(return, Os) ->
    [{return_errors, true}, {return_warnings, true} | Os];
preproc_opt(report, Os) ->
    [{report_errors, true}, {report_warnings, true} | Os];
preproc_opt({return, T}, Os) ->
    [{return_errors, T}, {return_warnings, T} | Os];
preproc_opt({report, T}, Os) ->
    [{report_errors, T}, {report_warnings, T} | Os];
preproc_opt(Option, Os) ->
    [try atom_option(Option) catch error:_ -> Option end | Os].

check_options([{Option, FileName0} | Options], AllOptions, L)
          when Option =:= includefile; Option =:= scannerfile ->
    case is_filename(FileName0) of
        no -> 
            badarg;
        Filename -> 
            check_options(Options, AllOptions, [{Option, Filename} | L])
    end;
check_options([{Option, Boolean} | Options], AllOptions, L)
          when is_boolean(Boolean) ->
    case lists:member(Option, AllOptions) of
        true ->
            check_options(Options, AllOptions, [{Option, Boolean} | L]);
        false ->
            badarg
        end;
check_options([], _AllOptions, L) ->
    L;
check_options(_Options, _, _L) ->
    badarg.

all_options() ->
    [dfa_graph,includefile,report_errors,report_warnings,
     return_errors,return_warnings,scannerfile,verbose,
     warnings_as_errors].

default_option(dfa_graph) -> false;
default_option(includefile) -> [];
default_option(report_errors) -> true;
default_option(report_warnings) -> true;
default_option(return_errors) -> false;
default_option(return_warnings) -> false;
default_option(scannerfile) -> [];
default_option(verbose) -> false;
default_option(warnings_as_errors) -> false.

atom_option(dfa_graph) -> {dfa_graph,true};
atom_option(report_errors) -> {report_errors,true};
atom_option(report_warnings) -> {report_warnings,true};
atom_option(warnings_as_errors) -> {warnings_as_errors,true};
atom_option(return_errors) -> {return_errors,true};
atom_option(verbose) -> {verbose,true};
atom_option(return_warnings) -> {return_warnings,true};
atom_option(Key) -> Key.

is_filename(T) ->
    try filename:flatten(T)
    catch error: _ -> no
    end.    

shorten_filename(Name0) ->
    {ok,Cwd} = file:get_cwd(),
    case string:prefix(Name0, Cwd) of
        nomatch -> Name0;
        Rest ->
            case unicode:characters_to_list(Rest) of
                "/"++N -> N;
                N -> N
            end
    end.

leex_ret(St) ->
    report_errors(St),
    report_warnings(St),
    Es = pack_errors(St#leex.errors),
    Ws = pack_warnings(St#leex.warnings),
    Werror = werror(St),
    if 
        Werror ->
            do_error_return(St, Es, Ws);
        Es =:= [] -> 
            case member(return_warnings, St#leex.opts) of
                true -> {ok, St#leex.efile, Ws};
                false -> {ok, St#leex.efile}
            end;
        true ->
            do_error_return(St, Es, Ws)
    end.

do_error_return(St, Es, Ws) ->
    case member(return_errors, St#leex.opts) of
        true -> {error, Es, Ws};
        false -> error
    end.

werror(St) ->
    St#leex.warnings =/= []
	andalso member(warnings_as_errors, St#leex.opts).

pack_errors([{File,_} | _] = Es) ->
    [{File, flatmap(fun({_,E}) -> [E] end, sort(Es))}];
pack_errors([]) ->
    [].
    
pack_warnings([{File,_} | _] = Ws) ->
    [{File, flatmap(fun({_,W}) -> [W] end, sort(Ws))}];
pack_warnings([]) ->
    [].

report_errors(St) ->
    when_opt(fun () -> 
                     foreach(fun({File,{none,Mod,E}}) -> 
                                     io:fwrite("~ts: ~ts\n",
                                               [File,Mod:format_error(E)]);
                                ({File,{Line,Mod,E}}) -> 
                                     io:fwrite("~ts:~w: ~ts\n",
                                               [File,Line,Mod:format_error(E)])
                             end, sort(St#leex.errors))
             end, report_errors, St#leex.opts).

report_warnings(St) ->
    Werror = member(warnings_as_errors, St#leex.opts),
    Prefix = case Werror of
		 true -> "";
		 false -> "Warning: "
	     end,
    ReportWerror = Werror andalso member(report_errors, St#leex.opts),
    ShouldReport = member(report_warnings, St#leex.opts) orelse ReportWerror,
    when_bool(fun () ->
		      foreach(fun({File,{none,Mod,W}}) ->
				      io:fwrite("~ts: ~s~ts\n",
						[File,Prefix,
						 Mod:format_error(W)]);
				 ({File,{Line,Mod,W}}) ->
				      io:fwrite("~ts:~w: ~s~ts\n",
						[File,Line,Prefix,
						 Mod:format_error(W)])
			      end, sort(St#leex.warnings))
	      end, ShouldReport).

-spec add_error(_, #leex{}) -> no_return().
add_error(E, St) ->
    add_error(St#leex.xfile, E, St).

add_error(File, Error, St) ->
    throw(St#leex{errors = [{File,Error}|St#leex.errors]}).

add_warning(Line, W, St) ->
    St#leex{warnings = [{St#leex.xfile,{Line,leex,W}}|St#leex.warnings]}.

%% filenames(File, Options, State) -> State.
%%  The default output dir is the current directory unless an
%%  explicit one has been given in the options.

filenames(File, Opts, St0) ->
    Dir = filename:dirname(File),
    Base = filename:basename(File, ".xrl"),
    Xfile = filename:join(Dir, Base ++ ".xrl"),
    Efile = Base ++ ".erl",
    Gfile = Base ++ ".dot",
    Module = list_to_atom(Base),
    St1 = St0#leex{xfile=Xfile,
                   opts=Opts,
                   module=Module},
    {includefile,Ifile0} = lists:keyfind(includefile, 1, Opts),
    Ifile = inc_file_name(Ifile0),
    %% Test for explicit scanner file.
    {scannerfile,Ofile} = lists:keyfind(scannerfile, 1, Opts),
    if
        Ofile =:= [] ->
            St1#leex{efile=filename:join(Dir, Efile),
                     ifile=Ifile,
                     gfile=filename:join(Dir, Gfile)};
        true ->
            D = filename:dirname(Ofile),
            St1#leex{efile=Ofile,
                     ifile=Ifile,
                     gfile=filename:join(D, Gfile)}
    end.

when_opt(Do, Opt, Opts) ->
    case member(Opt, Opts) of
        true -> Do();
        false -> ok
    end.

when_bool(Do, Bool) ->
    case Bool of
	true -> Do();
	false -> ok
    end.

verbose_print(St, Format, Args) ->
    when_opt(fun () -> io:fwrite(Format, Args) end, verbose, St#leex.opts).

%% parse_file(State) -> {ok,[REA],[Action],Code,NewState} | throw(NewState)
%%  when
%%      REA = {RegExp,ActionNo};
%%      Action = {ActionNo,ActionString};
%%      Code = {StartLine, StartPos, NumOfLines}. Where the Erlang code is.
%%
%%  Read and parse the file Xfile.
%%  After each section of the file has been parsed we directly call the
%%  next section. This is done when we detect a line we don't recognise
%%  in the current section. The file format is very simple and Erlang
%%  token based, we allow empty lines and Erlang style comments.

parse_file(St0) ->
    case file:open(St0#leex.xfile, [read]) of
        {ok,Xfile} ->
            St1 = St0#leex{encoding = epp:set_encoding(Xfile)},
            try
                verbose_print(St1, "Parsing file ~ts, ", [St1#leex.xfile]),
                %% We KNOW that errors throw so we can ignore them here.
                {ok,Line1,St2} = parse_head(Xfile, St1),
                {ok,Line2,Macs,St3} = parse_defs(Xfile, Line1, St2),
                {ok,Line3,REAs,Actions,St4} =
                    parse_rules(Xfile, Line2, Macs, St3),
                {ok,Code,St5} = parse_code(Xfile, Line3, St4),
                verbose_print(St5, "contained ~w rules.~n", [length(REAs)]),
                {ok,REAs,Actions,Code,St5}
            after ok = file:close(Xfile)
            end;
        {error,Error} ->
            add_error({none,leex,{file_error,Error}}, St0)
    end.

%% parse_head(File, State) -> {ok,NextLine,State}.
%%  Parse the head of the file. Skip all comments and blank lines.

parse_head(Ifile, St) -> {ok,nextline(Ifile, 0, St),St}.

%% parse_defs(File, Line, State) -> {ok,NextLine,Macros,State}.
%%  Parse the macro definition section of a file. This must exist.
%%  The section is ended by a non-blank line which is not a macro def.

parse_defs(Ifile, {ok,?DEFS_HEAD ++ Rest,L}, St) ->
    St1 = warn_ignored_chars(L, Rest, St),
    parse_defs(Ifile, nextline(Ifile, L, St), [], St1);
parse_defs(_, {ok,_,L}, St) ->
    add_error({L,leex,missing_defs}, St);
parse_defs(_, {eof,L}, St) ->
    add_error({L,leex,missing_defs}, St).

parse_defs(Ifile, {ok,Chars,L}=Line, Ms, St) ->
    %% This little beauty matches out a macro definition, RE's are so clear.
    MS = "^[ \t]*([A-Z_][A-Za-z0-9_]*)[ \t]*=[ \t]*([^ \t\r\n]*)[ \t\r\n]*\$",
    case re:run(Chars, MS, [{capture,all_but_first,list},unicode]) of
        {match,[Name,Def]} ->
            %%io:fwrite("~p = ~p\n", [Name,Def]),
            parse_defs(Ifile, nextline(Ifile, L, St), [{Name,Def}|Ms], St);
        _ -> {ok,Line,Ms,St}                    % Anything else
    end;
parse_defs(_, Line, Ms, St) ->
    {ok,Line,Ms,St}.

%% parse_rules(File, Line, Macros, State) -> {ok,NextLine,REAs,Actions,State}.
%%  Parse the RE rules section of the file. This must exist.

parse_rules(Ifile, {ok,?RULE_HEAD ++ Rest,L}, Ms, St) ->
    St1 = warn_ignored_chars(L, Rest, St),
    parse_rules(Ifile, nextline(Ifile, L, St), Ms, [], [], 0, St1);
parse_rules(_, {ok,_,L}, _, St) ->
    add_error({L,leex,missing_rules}, St);
parse_rules(_, {eof,L}, _, St) ->
    add_error({L,leex,missing_rules}, St).

%% parse_rules(File, Result, Macros, RegExpActions, Actions, Acount, State) ->
%%      {ok,NextCLine,RegExpActions,Actions,NewState} | throw(NewState)

parse_rules(Ifile, NextLine, Ms, REAs, As, N, St) ->
    case NextLine of
        {ok,?CODE_HEAD ++ _Rest,_} ->
            parse_rules_end(Ifile, NextLine, REAs, As, St);
        {ok,Chars,L0} ->
            %%io:fwrite("~w: ~p~n", [L0,Chars]),
            case collect_rule(Ifile, Chars, L0) of
                {ok,Re,Atoks,L1} ->
                    {ok,REA,A,St1} = parse_rule(Re, L0, Atoks, Ms, N, St),
                    parse_rules(Ifile, nextline(Ifile, L1, St), Ms,
                                [REA|REAs], [A|As], N+1, St1);
                {error,E} -> add_error(E, St)
            end;
        {eof,_} ->
            parse_rules_end(Ifile, NextLine, REAs, As, St)
    end.

parse_rules_end(_, {ok,_,L}, [], [], St) ->
    add_error({L,leex,empty_rules}, St);
parse_rules_end(_, {eof,L}, [], [], St) ->
    add_error({L,leex,empty_rules}, St);
parse_rules_end(_, NextLine, REAs, As, St) ->
    %% Must be *VERY* careful to put rules in correct order!
    {ok,NextLine,reverse(REAs),reverse(As),St}.

%% collect_rule(File, Line, Lineno) ->
%%      {ok,RegExp,ActionTokens,NewLineno} | {error,E}.
%% Collect a complete rule by reading lines until the the regexp and
%% action has been read. Keep track of line number.

collect_rule(Ifile, Chars, L0) ->
    {RegExp,Rest} = string:take(Chars, " \t\r\n", true),
    case collect_action(Ifile, Rest, L0, []) of
        {ok,[{':',_}|Toks],L1} -> {ok,RegExp,Toks,L1};
        {ok,_,_} -> {error,{L0,leex,bad_rule}};
        {eof,L1} -> {error,{L1,leex,bad_rule}};
        {error,E,_} -> {error,E}
    end.

collect_action(_Ifile, {error, _}, L, _Cont0) ->
    {error, {L, leex, cannot_parse}, ignored_end_line};
collect_action(Ifile, Chars, L0, Cont0) ->
    case erl_scan:tokens(Cont0, Chars, L0) of
        {done,{ok,Toks,_},_} -> {ok,Toks,L0};
        {done,{eof,_},_} -> {eof,L0};
        {done,{error,E,_},_} -> {error,E,L0};
        {more,Cont1} ->
            collect_action(Ifile, io:get_line(Ifile, leex), L0+1, Cont1)
    end.

%% parse_rule(RegExpString, RegExpLine, ActionTokens, Macros, Counter, State) ->
%%      {ok,{RE,Action},ActionData,State}.
%%  Parse one regexp after performing macro substition.

parse_rule(S, Line, [{dot,_}], Ms, N, St) ->
    case parse_rule_regexp(S, Ms, St) of
        {ok,R} ->
            {ok,{R,N},{N,empty_action},St};
        {error,E} ->
            add_error({Line,leex,E}, St)
    end;
parse_rule(S, Line, Atoks, Ms, N, St) ->
    case parse_rule_regexp(S, Ms, St) of
        {ok,R} ->
            %%io:fwrite("RE = ~p~n", [R]),
            %% Check for token variables.
            TokenChars = var_used('TokenChars', Atoks),
            TokenLen = var_used('TokenLen', Atoks),
            TokenLine = var_used('TokenLine', Atoks),
            {ok,{R,N},{N,Atoks,TokenChars,TokenLen,TokenLine},St};
        {error,E} ->
            add_error({Line,leex,E}, St)
    end.

var_used(Name, Toks) ->
    case lists:keyfind(Name, 3, Toks) of
        {var,_,Name} -> true;                   %It's the var we want
        _ -> false
    end.

%% parse_rule_regexp(RegExpString, Macros, State) ->
%%     {ok,RegExp} | {error,Error}.
%% Substitute in macros and parse RegExpString. Cannot use re:replace
%% here as it uses info in replace string (&).

parse_rule_regexp(RE0, [{M,Exp}|Ms], St) ->
    Split= re:split(RE0, "\\{" ++ M ++ "\\}", [{return,list},unicode]),
    RE1 = lists:append(lists:join(Exp, Split)),
    parse_rule_regexp(RE1, Ms, St);
parse_rule_regexp(RE, [], St) ->
    %%io:fwrite("RE = ~p~n", [RE]),
    case re_parse(RE, St) of
        {ok,R} -> {ok,R};
        {error,E} -> {error,{regexp,E}}
    end.

%% parse_code(File, Line, State) -> {ok,Code,NewState}.
%%  Finds the line and the position where the code section of the file
%%  begins. This must exist.

parse_code(Ifile, {ok,?CODE_HEAD ++ Rest,CodeL}, St) ->
    St1 = warn_ignored_chars(CodeL, Rest, St),
    {ok, CodePos} = file:position(Ifile, cur),
    %% Just count the lines; copy the code from file to file later.
    EndCodeLine = count_lines(Ifile, CodeL, St),
    NCodeLines = EndCodeLine - CodeL,
    {ok,{CodeL,CodePos,NCodeLines},St1};
parse_code(_, {ok,_,L}, St) ->
    add_error({L,leex,missing_code}, St);
parse_code(_, {eof,L}, St) ->
    add_error({L,leex,missing_code}, St).

count_lines(File, N, St) ->
    case io:get_line(File, leex) of
        eof -> N;
        {error, _} -> add_error({N+1, leex, cannot_parse}, St);
        _Line -> count_lines(File, N+1, St)
    end.

%% nextline(InputFile, PrevLineNo, State) -> {ok,Chars,LineNo} | {eof,LineNo}.
%%  Get the next line skipping comment lines and blank lines.

nextline(Ifile, L, St) ->
    case io:get_line(Ifile, leex) of
        eof -> {eof,L};
        {error, _} -> add_error({L+1, leex, cannot_parse}, St);
        Chars ->
            case string:take(Chars, " \t\n") of
                {_, [$%|_Rest]} -> nextline(Ifile, L+1, St);
                {_, []} -> nextline(Ifile, L+1, St);
                _Other -> {ok,Chars,L+1}
            end
    end.

warn_ignored_chars(Line, S, St) ->
    case non_white(S) of
        [] -> St;
        _ -> add_warning(Line, ignored_characters, St)
    end.

non_white(S) ->
    [C || C <- S, C > $\s, C < $\200 orelse C > $\240].

%% This is the regular expression grammar used. It is equivalent to the
%% one used in AWK, except that we allow ^ $ to be used anywhere and fail
%% in the matching.
%%
%% reg -> alt : '$1'.
%% alt -> seq "|" seq ... : {alt,['$1','$2'...]}.
%% seq -> repeat repeat ... : {seq,['$1','$2'...]}.
%% repeat -> repeat "*" : {kclosure,'$1'}.
%% repeat -> repeat "+" : {pclosure,'$1'}.
%% repeat -> repeat "?" : {optional,'$1'}.
%% repeat -> repeat "{" [Min],[Max] "}" : {interval,'$1',Min,Max}
%% repeat -> single : '$1'.
%% single -> "(" reg ")" : {sub,'$2',Number}.
%% single -> "^" : bos/bol.
%% single -> "$" : eos/eol.
%% single -> "." : any.
%% single -> "[" class "]" : {char_class,char_class('$2')}
%% single -> "[" "^" class "]" : {comp_class,char_class('$3')}.
%% single -> "\"" chars "\"" : {lit,'$2'}.
%% single -> "\\" char : {lit,['$2']}.
%% single -> char : {lit,['$1']}.
%% single -> empty : epsilon.
%%  The grammar of the current regular expressions. The actual parser
%%  is a recursive descent implementation of the grammar.

%% re_parse(Chars, State) -> {ok,RegExp} | {error,Error}.

re_parse(Cs0, St) ->
    case catch re_reg(Cs0, 0, St) of
        {RE,_,[]} -> {ok,RE};
        {_,_,[C|_]} -> {error,{illegal_char,[C]}};
        {parse_error,E} -> {error,E}
    end.

parse_error(E) -> throw({parse_error,E}).

re_reg(Cs, Sn, St) -> re_alt(Cs, Sn, St).

re_alt(Cs0, Sn0, St) ->
    {L,Sn1,Cs1} = re_seq(Cs0, Sn0, St),
    case re_alt1(Cs1, Sn1, St) of
        {[],Sn2,Cs2} -> {L,Sn2,Cs2};
        {Rs,Sn2,Cs2} -> {{alt,[L|Rs]},Sn2,Cs2}
    end.

re_alt1([$||Cs0], Sn0, St) ->
    {L,Sn1,Cs1} = re_seq(Cs0, Sn0, St),
    {Rs,Sn2,Cs2} = re_alt1(Cs1, Sn1, St),
    {[L|Rs],Sn2,Cs2};
re_alt1(Cs, Sn, _) -> {[],Sn,Cs}.

%% Parse a sequence of regexps. Don't allow the empty sequence.
%% re_seq(Cs0, Sn0, St) ->
%%     {L,Sn1,Cs1} = repeat(Cs0, Sn0, St),
%%     case re_seq1(Cs1, Sn1, St) of
%%      {[],Sn2,Cs2} -> {L,Sn2,Cs2};
%%      {Rs,Sn2,Cs2} -> {{seq,[L|Rs]},Sn2,Cs2}
%%     end.

%% re_seq(Chars, SubNumber, State) -> {RegExp,SubNumber,Chars}.
%% Parse a sequence of regexps. Allow the empty sequence, returns epsilon.

re_seq(Cs0, Sn0, St) ->
    case re_seq1(Cs0, Sn0, St) of
        {[],Sn1,Cs1} -> {epsilon,Sn1,Cs1};
        {[R],Sn1,Cs1} -> {R,Sn1,Cs1};
        {Rs,Sn1,Cs1} -> {{seq,Rs},Sn1,Cs1}
    end.

re_seq1([C|_]=Cs0, Sn0, St) when C =/= $|, C =/= $) ->
    {L,Sn1,Cs1} = re_repeat(Cs0, Sn0, St),
    {Rs,Sn2,Cs2} = re_seq1(Cs1, Sn1, St),
    {[L|Rs],Sn2,Cs2};
re_seq1(Cs, Sn, _) -> {[],Sn,Cs}.

%% re_repeat(Chars, SubNumber, State) -> {RegExp,SubNumber,Chars}.

re_repeat(Cs0, Sn0, St) ->
    {S,Sn1,Cs1} = re_single(Cs0, Sn0, St),
    re_repeat1(Cs1, Sn1, S, St).

re_repeat1([$*|Cs], Sn, S, St) -> re_repeat1(Cs, Sn, {kclosure,S}, St);
re_repeat1([$+|Cs], Sn, S, St) -> re_repeat1(Cs, Sn, {pclosure,S}, St);
re_repeat1([$?|Cs], Sn, S, St) -> re_repeat1(Cs, Sn, {optional,S}, St);
%% { only starts interval when ere is true, otherwise normal character.
%% re_repeat1([${|Cs0], Sn, S, #leex{posix=true}=St) ->    % $}
%%     case re_interval_range(Cs0) of
%%         {Min,Max,[$}|Cs1]} when is_integer(Min), is_integer(Max), Min =< Max ->
%%             re_repeat1(Cs1, Sn, {interval,S,Min,Max}, St);
%%         {Min,Max,[$}|Cs1]} when is_integer(Min), is_atom(Max) ->
%%             re_repeat1(Cs1, Sn, {interval,S,Min,Max}, St);
%%         {_,_,Cs1} -> parse_error({interval_range,string_between([${|Cs0], Cs1)})
%%     end;
re_repeat1(Cs, Sn, S, _) -> {S,Sn,Cs}.

%% re_single(Chars, SubNumber, State) -> {RegExp,SubNumber,Chars}.
%% Parse a re_single regexp.

re_single([$(|Cs0], Sn0, St) ->                % $)
    Sn1 = Sn0 + 1,                             % Keep track of sub count anyway
    case re_reg(Cs0, Sn1, St) of
        {S,Sn2,[$)|Cs1]} -> {S,Sn2,Cs1};
        %%{S,Sn2,[$)|Cs1]} -> {{sub,S,Sn1},Sn2,Cs1};
        _ -> parse_error({unterminated,"("})
    end;
%% These are not legal inside a regexp.
%% re_single([$^|Cs], Sn, St) -> {bos,Sn,Cs};
%% re_single([$$|Cs], Sn, St) -> {eos,Sn,Cs};
%% re_single([$.|Cs], Sn, St) -> {any,Sn,Cs};
re_single([$.|Cs], Sn, _) -> {{comp_class,"\n"},Sn,Cs}; % Do this here?
re_single("[^" ++ Cs0, Sn, St) ->
    case re_char_class(Cs0, St) of
        {Cc,[$]|Cs1]} -> {{comp_class,Cc},Sn,Cs1};
        _ -> parse_error({unterminated,"["})
    end;
re_single([$[|Cs0], Sn, St) ->
    case re_char_class(Cs0, St) of
        {Cc,[$]|Cs1]} -> {{char_class,Cc},Sn,Cs1};
        _ -> parse_error({unterminated,"["})
    end;
re_single([$\\|Cs0], Sn, _) ->
    {C,Cs1} = re_char($\\, Cs0),
    {{lit,[C]},Sn,Cs1};
re_single([C|Cs0], Sn, St) ->
    case special_char(C, St) of
        true -> parse_error({illegal_char,[C]});
        false ->
            {C,Cs1} = re_char(C, Cs0),
            {{lit,[C]},Sn,Cs1}
    end.

-define(IS_HEX(C), C >= $0 andalso C =< $9 orelse
        C >= $A andalso C =< $F orelse
        C >= $a andalso C =< $f).

%% re_char(Char, Chars) -> {CharValue,Chars}.
%%  Reads one character value from the input list, it knows about escapes.

re_char($\\, [O1,O2,O3|S]) when
  O1 >= $0, O1 =< $7, O2 >= $0, O2 =< $7, O3 >= $0, O3 =< $7 ->
    {(O1*8 + O2)*8 + O3 - 73*$0,S};
re_char($\\, [$x,H1,H2|S]) when ?IS_HEX(H1), ?IS_HEX(H2) ->
    {erlang:list_to_integer([H1,H2], 16),S};
re_char($\\,[$x,${|S0]) -> 
    re_hex(S0, []);
re_char($\\,[$x|_]) ->
    parse_error({illegal_char,"\\x"});
re_char($\\, [C|S]) -> {escape_char(C),S};
re_char($\\, []) -> parse_error({unterminated,"\\"});
re_char(C, S) -> {C,S}.                         % Just this character

re_hex([C|Cs], L) when ?IS_HEX(C) -> re_hex(Cs, [C|L]);
re_hex([$}|S], L0) -> 
    L = lists:reverse(L0),
    case erlang:list_to_integer(L, 16) of
        C when C =< 16#10FFFF -> {C,S};
        _ -> parse_error({illegal_char,[$\\,$x,${|L]++"}"})
    end;
re_hex(_, _) -> parse_error({unterminated,"\\x{"}).

%% special_char(Char, State) -> bool().
%% These are the special characters for an ERE.
%% N.B. ]}) are only special in the context after [{(.

special_char($^, _) -> true;
special_char($., _) -> true;
special_char($[, _) -> true;
special_char($$, _) -> true;
special_char($(, _) -> true;
special_char($), _) -> true;
special_char($|, _) -> true;
special_char($*, _) -> true;
special_char($+, _) -> true;
special_char($?, _) -> true;
%% special_char(${, #leex{posix=true}) -> true;    % Only when POSIX set
special_char($\\, _) -> true;
special_char(_, _) -> false.

%% re_char_class(Chars, State) -> {CharClass,Chars}.
%% Parse a character class.

re_char_class([$]|Cs], St) ->                   % Must special case this.
    re_char_class(Cs, [$]], St);
re_char_class(Cs, St) -> re_char_class(Cs, [], St).

%% re_char_class("[:" ++ Cs0, Cc, #leex{posix=true}=St) ->
%%     %% POSIX char class only.
%%     case posix_cc(Cs0) of
%%         {Pcl,":]" ++ Cs1} -> re_char_class(Cs1, [{posix,Pcl}|Cc], St);
%%         {_,Cs1} -> parse_error({posix_cc,string_between(Cs0, Cs1)})
%%     end;
re_char_class([C1|Cs0], Cc, St) when C1 =/= $] ->
    case re_char(C1, Cs0) of
        {Cf,[$-,C2|Cs1]} when C2 =/= $] ->
            case re_char(C2, Cs1) of
                {Cl,Cs2} when Cf < Cl ->
                    re_char_class(Cs2, [{range,Cf,Cl}|Cc], St);
                {_,Cs2} ->
                    parse_error({char_class,string_between([C1|Cs0], Cs2)})
            end;
        {C,Cs1} -> re_char_class(Cs1, [C|Cc], St)
    end;
re_char_class(Cs, Cc, _) -> {reverse(Cc),Cs}.   % Preserve order

%% posix_cc(String) -> {PosixClass,RestString}.
%%  Handle POSIX character classes.

%% posix_cc("alnum" ++ Cs) -> {alnum,Cs};
%% posix_cc("alpha" ++ Cs) -> {alpha,Cs};
%% posix_cc("blank" ++ Cs) -> {blank,Cs};
%% posix_cc("cntrl" ++ Cs) -> {cntrl,Cs};
%% posix_cc("digit" ++ Cs) -> {digit,Cs};
%% posix_cc("graph" ++ Cs) -> {graph,Cs};
%% posix_cc("lower" ++ Cs) -> {lower,Cs};
%% posix_cc("print" ++ Cs) -> {print,Cs};
%% posix_cc("punct" ++ Cs) -> {punct,Cs};
%% posix_cc("space" ++ Cs) -> {space,Cs};
%% posix_cc("upper" ++ Cs) -> {upper,Cs};
%% posix_cc("xdigit" ++ Cs) -> {xdigit,Cs};
%% posix_cc(Cs) -> parse_error({posix_cc,string:slice(Cs, 0, 5)}).

escape_char($n) -> $\n;                         % \n = LF
escape_char($r) -> $\r;                         % \r = CR
escape_char($t) -> $\t;                         % \t = TAB
escape_char($v) -> $\v;                         % \v = VT
escape_char($b) -> $\b;                         % \b = BS
escape_char($f) -> $\f;                         % \f = FF
escape_char($e) -> $\e;                         % \e = ESC
escape_char($s) -> $\s;                         % \s = SPACE
escape_char($d) -> $\d;                         % \d = DEL
escape_char(C) -> C.                            % Pass it straight through

%% re_interval_range(Chars) -> {Min,Max,RestChars}.
%% NoInt     -> none,none
%% Int       -> Int,none
%% Int,      -> Int,any
%% Int1,Int2 -> Int1,Int2

%% re_interval_range(Cs0) ->
%%     case re_number(Cs0) of
%%         {none,Cs1} -> {none,none,Cs1};
%%         {N,[$,|Cs1]} ->
%%             case re_number(Cs1) of
%%                 {none,Cs2} -> {N,any,Cs2};
%%                 {M,Cs2} -> {N,M,Cs2}
%%             end;
%%         {N,Cs1} -> {N,none,Cs1}
%%     end.

%% re_number([C|Cs]) when C >= $0, C =< $9 ->
%%     re_number(Cs, C - $0);
%% re_number(Cs) -> {none,Cs}.

%% re_number([C|Cs], Acc) when C >= $0, C =< $9 ->
%%     re_number(Cs, 10*Acc + (C - $0));
%% re_number(Cs, Acc) -> {Acc,Cs}.

string_between(Cs1, Cs2) ->
    string:slice(Cs1, 0, string:length(Cs1)-string:length(Cs2)).

%% We use standard methods, Thompson's construction and subset
%% construction, to create first an NFA and then a DFA from the
%% regexps. A non-standard feature is that we work with sets of
%% character ranges (crs) instead sets of characters. This is most
%% noticeable when constructing DFAs. The major benefit is that we can
%% handle characters from any set, not just limited ASCII or 8859,
%% even 16/32 bit unicode.
%%
%% The whole range of characters is 0-maxchar, where maxchar is a BIG
%% number. We don't make any assumptions about the size of maxchar, it
%% is just bigger than any character.
%%
%% Using character ranges makes describing many regexps very simple,
%% for example the regexp "." just becomes the range
%% [{0-9},{11-maxchar}].

%% make_nfa(RegExpActions) -> {ok,{NFA,StartState}} | {error,E}.
%% Build a complete nfa from a list of {RegExp,Action}. The NFA field
%% accept has values {yes,Action}|no. The NFA is a list of states.

make_dfa(REAs, St) ->
    {NFA,NF} = build_combined_nfa(REAs),
    verbose_print(St, "NFA contains ~w states, ", [tuple_size(NFA)]),
    {DFA0,DF0} = build_dfa(NFA, NF),
    verbose_print(St, "DFA contains ~w states, ", [length(DFA0)]),
    {DFA,DF} = minimise_dfa(DFA0, DF0),
    verbose_print(St, "minimised to ~w states.~n", [length(DFA)]),
    %%io:fwrite("~p\n", [{NF,NFA}]),
    %%io:fwrite("~p\n", [{DF0,DFA0}]),
    %%io:fwrite("~p\n", [{DF,DFA}]),
    {DFA,DF}.

%% build_combined_nfa(RegExpActionList) -> {NFA,FirstState}.
%%  Build the combined NFA using Thompson's construction straight out
%%  of the book. Build the separate NFAs in the same order as the
%%  rules so that the accepting have ascending states have ascending
%%  state numbers. Start numbering the states from 1 as we put the
%%  states in a tuple with the state number as the index.
%%
%%  The edges from a state are a list of {CharRange,State} | {epsilon,State}.

build_combined_nfa(REAs) ->
    {NFA0,Firsts,Free} = build_nfa_list(REAs, [], [], 1),
    F = #nfa_state{no=Free,edges=epsilon_trans(Firsts)},
    {list_to_tuple(keysort(#nfa_state.no, [F|NFA0])),Free}.

build_nfa_list([{RE,Action}|REAs], NFA0, Firsts, Free0) ->
    {NFA1,Free1,First} = build_nfa(RE, Free0, Action),
    build_nfa_list(REAs, NFA1 ++ NFA0, [First|Firsts], Free1);
build_nfa_list([], NFA, Firsts, Free) ->
    {NFA,reverse(Firsts),Free}.

epsilon_trans(Firsts) -> [ {epsilon,F} || F <- Firsts ].

%% build_nfa(RegExp, NextState, Action) -> {NFA,NextState,FirstState}.
%%  When building the NFA states for a regexp we don't build the end
%%  state, just allocate a State for it and return this state's
%%  number. This allows us to avoid building unnecessary states for
%%  concatenation which would then have to be removed by overwriting
%%  an existing state.

build_nfa(RE, N0, Action) ->
    {NFA,N1,E} = build_nfa(RE, N0+1, N0, []),
    {[#nfa_state{no=E,accept={accept,Action}}|NFA],N1,N0}.

%% build_nfa(RegExp, NextState, FirstState, NFA) -> {NFA,NextState,EndState}.
%%  Build an NFA from the RegExp. NFA is a list of #nfa_state{} in no
%%  predefined order. NextState is the number of the next free state
%%  to use, FirstState is the the state which must be the start for
%%  this regexp as a previous regexp refers to it, EndState is the
%%  state to which this NFA will exit to. The number of the returned
%%  EndState is already allocated!

build_nfa({alt,REs}, N, F, NFA) ->
    build_nfa_alt(REs, N, F, NFA);
build_nfa({seq,REs}, N, F, NFA) ->
    build_nfa_seq(REs, N, F, NFA);
build_nfa({kclosure,RE}, N0, F, NFA0) ->
    {NFA1,N1,E1} = build_nfa(RE, N0+1, N0, NFA0),
    E = N1,                             % End state
    {[#nfa_state{no=F,edges=[{epsilon,N0},{epsilon,E}]},
      #nfa_state{no=E1,edges=[{epsilon,N0},{epsilon,E}]}|NFA1],
     N1+1,E};
build_nfa({pclosure,RE}, N0, F, NFA0) ->
    {NFA1,N1,E1} = build_nfa(RE, N0+1, N0, NFA0),
    E = N1,                             % End state
    {[#nfa_state{no=F,edges=[{epsilon,N0}]},
      #nfa_state{no=E1,edges=[{epsilon,N0},{epsilon,E}]}|NFA1],
     N1+1,E};
build_nfa({optional,RE}, N0, F, NFA0) ->
    {NFA1,N1,E1} = build_nfa(RE, N0+1, N0, NFA0),
    E = N1,                             % End state
    {[#nfa_state{no=F,edges=[{epsilon,N0},{epsilon,E}]},
      #nfa_state{no=E1,edges=[{epsilon,E}]}|NFA1],
     N1+1,E};
build_nfa({char_class,Cc}, N, F, NFA) ->
    {[#nfa_state{no=F,edges=[{pack_cc(Cc),N}]}|NFA],N+1,N};
build_nfa({comp_class,Cc}, N, F, NFA) ->
    {[#nfa_state{no=F,edges=[{comp_class(Cc),N}]}|NFA],N+1,N};
build_nfa({lit,Cs}, N, F, NFA) ->               % Implicit concatenation
    build_nfa_lit(Cs, N, F, NFA);
build_nfa(epsilon, N, F, NFA) ->                % Just an epsilon transition
    {[#nfa_state{no=F,edges=[{epsilon,N}]}|NFA],N+1,N}.

%% build_nfa_lit(Chars, NextState, FirstState, NFA) -> {NFA,NextState,EndState}.
%%  Build an NFA for the sequence of literal characters.

build_nfa_lit(Cs, N0, F0, NFA0) ->
    foldl(fun (C, {NFA,N,F}) ->
                  {[#nfa_state{no=F,edges=[{[{C,C}],N}]}|NFA],N+1,N}
          end, {NFA0,N0,F0}, Cs).

%% build_nfa_lit([C|Cs], N, F, NFA0) when is_integer(C) ->
%%     NFA1 = [#nfa_state{no=F,edges=[{[{C,C}],N}]}|NFA0],
%%     build_nfa_lit(Cs, N+1, N, NFA1);
%% build_nfa_lit([], N, F, NFA) -> {NFA,N,F}.

%% build_nfa_seq(REs, NextState, FirstState, NFA) -> {NFA,NextState,EndState}.
%%  Build an NFA for the regexps in a sequence.

build_nfa_seq(REs, N0, F0, NFA0) ->
    foldl(fun (RE, {NFA,N,F}) -> build_nfa(RE, N, F, NFA) end,
          {NFA0,N0,F0}, REs).

%% build_nfa_seq([RE|REs], N0, F, NFA0) ->
%%     {NFA1,N1,E1} = build_nfa(RE, N0, F, NFA0),
%%     build_nfa_seq(REs, N1, E1, NFA1);
%% build_nfa_seq([], N, F, NFA) -> {NFA,N,F}.

%% build_nfa_alt(REs, NextState, FirstState, NFA) -> {NFA,NextState,EndState}.
%%  Build an NFA for the regexps in an alternative. N.B. we don't
%%  handle empty alts here but the parser should never generate them
%%  anyway.

build_nfa_alt([RE], N, F, NFA) -> build_nfa(RE, N, F, NFA);
build_nfa_alt([RE|REs], N0, F, NFA0) ->
    {NFA1,N1,E1} = build_nfa(RE, N0+1, N0, NFA0),
    {NFA2,N2,E2} = build_nfa_alt(REs, N1+1, N1, NFA1),
    E = N2,                                     % End state
    {[#nfa_state{no=F,edges=[{epsilon,N0},{epsilon,N1}]},
      #nfa_state{no=E1,edges=[{epsilon,E}]},
      #nfa_state{no=E2,edges=[{epsilon,E}]}|NFA2],
     N2+1,E}.

%% build_nfa_alt(REs, NextState, FirstState, NFA) -> {NFA,NextState,EndState}.
%%  Build an NFA for the regexps in an alternative. Make one big
%%  epsilon split state, not necessary but fun.

%% build_nfa_alt(REs, N0, F0, NFA0) ->
%%     E = N0,                                  % Must reserve End state first
%%     {Fs,{NFA1,N1}} = mapfoldl(fun (RE, {NFA,N}) ->
%%                                    build_nfa_alt1(RE, N, E, NFA)
%%                            end, {NFA0,N0+1}, REs),
%%     {[#nfa_state{no=F0,edges=epsilon_trans(Fs)},
%%       #nfa_state{no=E,edges=[{epsilon,N1}]}|NFA1],N1+1,N1}.

%% build_nfa_alt1(RE, N0, End, NFA0) ->
%%     {NFA1,N1,E} = build_nfa(RE, N0+1, N0, NFA0),
%%     {N0,{[#nfa_state{no=E,edges=[{epsilon,End}]}|NFA1],N1}}.

%% pack_cc(CharClass) -> CharClass
%%  Pack and optimise a character class specification (bracket
%%  expression). First sort it and then compact it.

pack_cc(Cc) ->
    Crs = foldl(fun ({range,Cf,Cl}, Set) -> add_element({Cf,Cl}, Set);
                    (C, Set) -> add_element({C,C}, Set)
                end, ordsets:new(), Cc),
    pack_crs(Crs).                              % An ordset IS a list!

pack_crs([{C1,C2}=Cr,{C3,C4}|Crs]) when C1 =< C3, C2 >= C4 ->
    %% C1      C2
    %%   C3  C4
    pack_crs([Cr|Crs]);
pack_crs([{C1,C2},{C3,C4}|Crs]) when C2 >= C3, C2 < C4 ->
    %% C1    C2
    %%    C3   C4
    pack_crs([{C1,C4}|Crs]);
pack_crs([{C1,C2},{C3,C4}|Crs]) when C2 + 1 =:= C3 ->
    %% C1   C2
    %%        C3  C4
    pack_crs([{C1,C4}|Crs]);
pack_crs([Cr|Crs]) -> [Cr|pack_crs(Crs)];
pack_crs([]) -> [].

comp_class(Cc) ->
    Crs = pack_cc(Cc),
    Comp = comp_crs(Crs, 0),
    %% io:fwrite("comp: ~p\n      ~p\n", [Crs,Comp]),
    Comp.

comp_crs([{0,C2}|Crs], 0) ->                   % Get first range right
    comp_crs(Crs, C2+1);
comp_crs([{C1,C2}|Crs], Last) ->
    [{Last,C1-1}|comp_crs(Crs, C2+1)];
comp_crs([], Last) -> [{Last,maxchar}].

%% build_dfa(NFA, NfaFirstState) -> {DFA,DfaFirstState}.
%%  Build a DFA from an NFA using "subset construction". The major
%%  difference from the book is that we keep the marked and unmarked
%%  DFA states in seperate lists. New DFA states are added to the
%%  unmarked list and states are marked by moving them to the marked
%%  list. We assume that the NFA accepting state numbers are in
%%  ascending order for the rules and use ordsets to keep this order.

build_dfa(NFA, Nf) ->
    D = #dfa_state{no=0,nfa=eclosure([Nf], NFA)},
    {build_dfa([D], 1, [], NFA),0}.

%% build_dfa([UnMarked], NextState, [Marked], NFA) -> DFA.
%%  Traverse the unmarked states. Temporarily add the current unmarked
%%  state to the marked list before calculating translation, this is
%%  to avoid adding too many duplicate states. Add it properly to the
%%  marked list afterwards with correct translations.

build_dfa([U|Us0], N0, Ms, NFA) ->
    {Ts,Us1,N1} = build_dfa(U#dfa_state.nfa, Us0, N0, [], [U|Ms], NFA),
    M = U#dfa_state{trans=Ts,accept=accept(U#dfa_state.nfa, NFA)},
    build_dfa(Us1, N1, [M|Ms], NFA);
build_dfa([], _, Ms, _) -> Ms.

%% build_dfa([NfaState], [Unmarked], NextState, [Transition], [Marked], NFA) ->
%%      {Transitions,UnmarkedStates,NextState}.
%%  Foreach NFA state set calculate the legal translations. N.B. must
%%  search *BOTH* the unmarked and marked lists to check if DFA state
%%  already exists. As the range of characters is potentially VERY
%%  large we cannot explicitly test all characters. Instead we first
%%  calculate the set of all disjoint character ranges which are
%%  possible candidates to the set of NFA states. The transitions are
%%  an orddict so we get the transition lists in ascending order.

build_dfa(Set, Us, N, Ts, Ms, NFA) ->
    %% List of all transition sets.
    Crs0 = [Cr || S <- Set,
                  {Crs,_St} <- (element(S, NFA))#nfa_state.edges,
                  Crs =/= epsilon,       % Not an epsilon transition
                  Cr <- Crs ],
    Crs1 = lists:usort(Crs0),            % Must remove duplicates!
    %% Build list of disjoint test ranges.
    Test = disjoint_crs(Crs1),
    %% io:fwrite("bd: ~p\n    ~p\n    ~p\n    ~p\n", [Set,Crs0,Crs1,Test]),
    build_dfa(Test, Set, Us, N, Ts, Ms, NFA).

%% disjoint_crs([CharRange]) -> [CharRange].
%%  Take a sorted list of char ranges and make a sorted list of
%%  disjoint char ranges. No new char range extends past an existing
%%  char range.

disjoint_crs([{_C1,C2}=Cr1,{C3,_C4}=Cr2|Crs]) when C2 < C3 ->
    %% C1  C2
    %%        C3  C4
    [Cr1|disjoint_crs([Cr2|Crs])];
disjoint_crs([{C1,C2},{C3,C4}|Crs]) when C1 =:= C3 ->
    %% C1     C2
    %% C3       C4
    [{C1,C2}|disjoint_crs(add_element({C2+1,C4}, Crs))];
disjoint_crs([{C1,C2},{C3,C4}|Crs]) when C1 < C3, C2 >= C3, C2 < C4 ->
    %% C1     C2
    %%    C3     C4
    [{C1,C3-1}|disjoint_crs(union([{C3,C2},{C2+1,C4}], Crs))];
disjoint_crs([{C1,C2},{C3,C4}|Crs]) when C1 < C3, C2 =:= C4 ->
    %% C1      C2
    %%    C3   C4
    [{C1,C3-1}|disjoint_crs(add_element({C3,C4}, Crs))];
disjoint_crs([{C1,C2},{C3,C4}|Crs]) when C1 < C3, C2 > C4 ->
    %% C1        C2
    %%    C3   C4
    [{C1,C3-1}|disjoint_crs(union([{C3,C4},{C4+1,C2}], Crs))];
disjoint_crs([Cr|Crs]) -> [Cr|disjoint_crs(Crs)];
disjoint_crs([]) -> [].

build_dfa([Cr|Crs], Set, Us, N, Ts, Ms, NFA) ->
    case eclosure(move(Set, Cr, NFA), NFA) of
        S when S =/= [] ->
            case dfa_state_exist(S, Us, Ms) of
                {yes,T} ->
                    build_dfa(Crs, Set, Us, N, store(Cr, T, Ts), Ms, NFA);
                no ->
                    U = #dfa_state{no=N,nfa=S},
                    build_dfa(Crs, Set, [U|Us], N+1, store(Cr, N, Ts), Ms, NFA)
            end;
        [] ->
            build_dfa(Crs, Set, Us, N, Ts, Ms, NFA)
    end;
build_dfa([], _, Us, N, Ts, _, _) ->
    {Ts,Us,N}.

%% dfa_state_exist(Set, Unmarked, Marked) -> {yes,State} | no.

dfa_state_exist(S, Us, Ms) ->
    case lists:keyfind(S, #dfa_state.nfa, Us) of
        #dfa_state{no=T} -> {yes,T};
        false ->
            case lists:keyfind(S, #dfa_state.nfa, Ms) of
                #dfa_state{no=T} -> {yes,T};
                false -> no
            end
    end.

%% eclosure([State], NFA) -> [State].
%% move([State], Char, NFA) -> [State].
%%  These are straight out of the book. As eclosure uses ordsets then
%%  the generated state sets are in ascending order.

eclosure(Sts, NFA) -> eclosure(Sts, NFA, []).

eclosure([St|Sts], NFA, Ec) ->
    #nfa_state{edges=Es} = element(St, NFA),
    eclosure([ N || {epsilon,N} <- Es,
		    not is_element(N, Ec) ] ++ Sts,
             NFA, add_element(St, Ec));
eclosure([], _, Ec) -> Ec.

move(Sts, Cr, NFA) ->
    %% io:fwrite("move1: ~p\n", [{Sts,Cr}]),
    [ St || N <- Sts,
            {Crs,St} <- (element(N, NFA))#nfa_state.edges,
            Crs =/= epsilon,             % Not an epsilon transition
            in_crs(Cr, Crs) ].

in_crs({C1,C2}, [{C3,C4}|_Crs]) when C1 >= C3, C2 =< C4 -> true;
in_crs(Cr, [Cr|_Crs]) -> true;          % Catch bos and eos.
in_crs(Cr, [_|Crs]) -> in_crs(Cr, Crs);
in_crs(_Cr, []) -> false.

%% accept([State], NFA) -> {accept,A} | noaccept.
%%  Scan down the state list until we find an accepting state.

accept([St|Sts], NFA) ->
    case element(St, NFA) of
        #nfa_state{accept={accept,A}} -> {accept,A};
        #nfa_state{accept=noaccept} -> accept(Sts, NFA)
    end;
accept([], _) -> noaccept.

%% minimise_dfa(DFA, DfaFirst) -> {DFA,DfaFirst}.
%%  Minimise the DFA by removing equivalent states. We consider a
%%  state if both the transitions and the their accept state is the
%%  same.  First repeatedly run throught the DFA state list removing
%%  equivalent states and updating remaining transitions with
%%  remaining equivalent state numbers. When no more reductions are
%%  possible then pack the remaining state numbers to get consecutive
%%  states.

minimise_dfa(DFA0, Df0) ->
    case min_dfa(DFA0) of
        {DFA1,[]} ->                    % No reduction!
            {DFA2,Rs} = pack_dfa(DFA1),
            {min_update(DFA2, Rs),min_use(Df0, Rs)};
        {DFA1,Rs} ->
            minimise_dfa(min_update(DFA1, Rs), min_use(Df0, Rs))
    end.

min_dfa(DFA) -> min_dfa(DFA, [], []).

min_dfa([D|DFA0], Rs0, MDFA) ->
    {DFA1,Rs1} = min_delete(DFA0, D#dfa_state.trans, D#dfa_state.accept,
                            D#dfa_state.no, Rs0, []),
    min_dfa(DFA1, Rs1, [D|MDFA]);
min_dfa([], Rs, MDFA) -> {MDFA,Rs}.

%% min_delete(States, Trans, Action, NewN, Rs, MiniDFA) -> {MiniDFA,Rs}.
%%  Delete all states with same transactions and action. Return
%%  rewrites and minimised DFA with no duplicate states.

min_delete([#dfa_state{no=N,trans=T,accept=A}|DFA], T, A, NewN, Rs, MDFA) ->
    min_delete(DFA, T, A, NewN, [{N,NewN}|Rs], MDFA);
min_delete([D|DFA], T, A, NewN, Rs, MDFA) ->
    min_delete(DFA, T, A, NewN, Rs, [D|MDFA]);
min_delete([], _, _, _, Rs, MDFA) -> {MDFA,Rs}.

min_update(DFA, Rs) ->
    [ D#dfa_state{trans=min_update_trans(D#dfa_state.trans, Rs)} || D <- DFA ].

min_update_trans(Tr, Rs) ->
    [ {C,min_use(S, Rs)} || {C,S} <- Tr ].

min_use(Old, [{Old,New}|_]) -> New;
min_use(Old, [_|Reds]) -> min_use(Old, Reds);
min_use(Old, []) -> Old.

pack_dfa(DFA) -> pack_dfa(DFA, 0, [], []).

pack_dfa([D|DFA], NewN, Rs, PDFA) ->
    pack_dfa(DFA, NewN+1,
             [{D#dfa_state.no,NewN}|Rs], [D#dfa_state{no=NewN}|PDFA]);
pack_dfa([], _, Rs, PDFA) -> {PDFA,Rs}.

%% The main output is the yystate function which is built from the
%% DFA. It has the spec:
%%
%% yystate() -> InitialState.
%% yystate(State, InChars, Line, CurrTokLen, AcceptAction, AcceptLen) ->
%%      {Action, AcceptLength, RestChars, Line} |         Accepting end state
%%      {Action, AcceptLength, RestChars, Line, State} |  Accepting state
%%      {reject, AcceptLength, CurrTokLen, RestChars, Line, State} |
%%      {Action, AcceptLength, CurrTokLen, RestChars, Line, State}.

%% The return CurrTokLen is always the current number of characters
%% scanned in the current token. The returns have the following
%% meanings:
%% {Action, AcceptLength, RestChars, Line} -
%%  The scanner has reached an accepting end-state, for example after
%%  a regexp "abc". Action is the action number and AcceptLength is
%%  the length of the matching token.
%%
%% {Action, AcceptLength, RestChars, Line, State} -
%%  The scanner has reached an accepting transition state, for example
%%  after c in regexp "abc(xyz)?", continuation depends on
%%  RestChars. If RestChars == [] (no more current characters) then we
%%  need to get more characters to see if it is an end-state,
%%  otherwise (eof or chars) then we have not found continuing
%%  characters and it is an end state.
%%
%% {reject, AcceptLength, CurrTokLen, RestChars, Line, State} -
%% {Action, AcceptLength, CurrTokLen, RestChars, Line, State} -
%%  The scanner has reached a non-accepting transition state. If
%%  RestChars == [] we need to get more characters to continue.
%%  Otherwise if 'reject' then no accepting state has been reached it
%%  is an error. If we have an Action and AcceptLength then these are
%%  the last accept state, use them and continue from there.

%% out_file(LeexState, DFA, DfaStart, [Action], Code) -> ok | error.
%%  Generate an output .erl file from the include file, the DFA and
%%  the code for the actions.

out_file(St0, DFA, DF, Actions, Code) ->
    verbose_print(St0, "Writing file ~ts, ", [St0#leex.efile]),
    case open_inc_file(St0) of
        {ok,Ifile} ->
            try
                case file:open(St0#leex.efile, [write]) of
                    {ok,Ofile} ->
                        set_encoding(St0, Ofile),
                        try 
                            output_encoding_comment(Ofile, St0),
                            output_file_directive(Ofile, St0#leex.ifile, 0),
                            out_file(Ifile, Ofile, St0, DFA, DF, Actions,
                                     Code, 1),
                            verbose_print(St0, "ok~n", []),
                            St0
                        after ok = file:close(Ofile)
                        end;
                    {error,Error} ->
                        verbose_print(St0, "error~n", []),
                        add_error({none,leex,{file_error,Error}}, St0)
                end
            after ok = file:close(Ifile)
            end;
        {{error,Error},Ifile} ->
            add_error(Ifile, {none,leex,{file_error,Error}}, St0)
    end.

open_inc_file(State) ->
    Ifile = State#leex.ifile,
    case file:open(Ifile, [read]) of
        {ok,F} ->
            _ = epp:set_encoding(F),
            {ok,F};
        Error -> {Error,Ifile}
    end.

inc_file_name([]) ->
    Incdir = filename:join(code:lib_dir(parsetools), "include"),
    filename:join(Incdir, ?LEEXINC);
inc_file_name(Filename) ->
    Filename.
                    
%% out_file(IncFile, OutFile, State, DFA, DfaStart, Actions, Code, Line) -> ok
%%  Copy the include file line by line substituting special lines with
%%  generated code. We cheat by only looking at the first 5
%%  characters.

out_file(Ifile, Ofile, St, DFA, DF, Actions, Code, L) ->
    case io:get_line(Ifile, leex) of
        eof -> output_file_directive(Ofile, St#leex.ifile, L);
        {error, _} -> add_error(St#leex.ifile, {L, leex, cannot_parse}, St);
        Line ->
            case string:slice(Line, 0, 5) of
                "##mod" -> out_module(Ofile, St);
                "##cod" -> out_erlang_code(Ofile, St, Code, L);
                "##dfa" -> out_dfa(Ofile, St, DFA, Code, DF, L);
                "##act" -> out_actions(Ofile, St#leex.xfile, Actions);
                _ -> io:put_chars(Ofile, Line)
            end,
            out_file(Ifile, Ofile, St, DFA, DF, Actions, Code, L+1)
    end.

out_module(File, St) ->
    io:fwrite(File, "-module(~w).\n", [St#leex.module]).

out_erlang_code(File, St, Code, L) ->
    {CodeL,CodePos,_NCodeLines} = Code,
    output_file_directive(File, St#leex.xfile, CodeL),
    {ok,Xfile} = file:open(St#leex.xfile, [read]),
    try
        set_encoding(St, Xfile),
        {ok,_} = file:position(Xfile, CodePos),
        ok = file_copy(Xfile, File)
    after 
        ok = file:close(Xfile)
    end,
    io:nl(File),
    output_file_directive(File, St#leex.ifile, L).

file_copy(From, To) ->
    case io:get_line(From, leex) of
        eof -> ok;
        Line when is_list(Line) ->
            io:fwrite(To, "~ts", [Line]),
            file_copy(From, To)
    end.

out_dfa(File, St, DFA, Code, DF, L) ->
    {_CodeL,_CodePos,NCodeLines} = Code,
    %% Three file attributes before this one...
    output_file_directive(File, St#leex.efile, L+(NCodeLines-1)+3),
    io:fwrite(File, "yystate() -> ~w.~n~n", [DF]),
    foreach(fun (S) -> out_trans(File, S) end, DFA),
    io:fwrite(File, "yystate(S, Ics, Line, Tlen, Action, Alen) ->~n", []),
    io:fwrite(File, "    {Action,Alen,Tlen,Ics,Line,S}.~n", []).

out_trans(File, #dfa_state{no=N,trans=[],accept={accept,A}}) ->
    %% Accepting end state, guaranteed done.
    io:fwrite(File, "yystate(~w, Ics, Line, Tlen, _, _) ->~n", [N]),
    io:fwrite(File, "    {~w,Tlen,Ics,Line};~n", [A]);
out_trans(File, #dfa_state{no=N,trans=Tr,accept={accept,A}}) ->
    %% Accepting state, but there maybe more.
    foreach(fun (T) -> out_accept_tran(File, N, A, T) end, pack_trans(Tr)),
    io:fwrite(File, "yystate(~w, Ics, Line, Tlen, _, _) ->~n", [N]),
    io:fwrite(File, "    {~w,Tlen,Ics,Line,~w};~n", [A,N]);
out_trans(File, #dfa_state{no=N,trans=Tr,accept=noaccept}) ->
    %% Non-accepting transition state.
    foreach(fun (T) -> out_noaccept_tran(File, N, T) end, pack_trans(Tr)),
    io:fwrite(File, "yystate(~w, Ics, Line, Tlen, Action, Alen) ->~n", [N]),
    io:fwrite(File, "    {Action,Alen,Tlen,Ics,Line,~w};~n", [N]).

out_accept_tran(File, N, A, {{Cf,maxchar},S}) ->
    out_accept_head_max(File, N, Cf),
    out_accept_body(File, S, "Line", A);
out_accept_tran(File, N, A, {{Cf,Cl},S}) ->
    out_accept_head_range(File, N, Cf, Cl),
    out_accept_body(File, S, "Line", A);
out_accept_tran(File, N, A, {$\n,S}) ->
    out_accept_head_1(File, N, $\n),
    out_accept_body(File, S, "Line+1", A);
out_accept_tran(File, N, A, {C,S}) ->
    out_accept_head_1(File, N, C),
    out_accept_body(File, S, "Line", A).

out_accept_head_1(File, State, Char) ->
    out_head_1(File, State, Char, "_", "_").

out_accept_head_max(File, State, Min) ->
    out_head_max(File, State, Min, "_", "_").

out_accept_head_range(File, State, Min, Max) ->
    out_head_range(File, State, Min, Max, "_", "_").

out_accept_body(File, Next, Line, Action) ->
    out_body(File, Next, Line, io_lib:write(Action), "Tlen").

out_noaccept_tran(File, N, {{Cf,maxchar},S}) ->
    out_noaccept_head_max(File, N, Cf),
    out_noaccept_body(File, S, "Line");
out_noaccept_tran(File, N, {{Cf,Cl},S}) ->
    out_noaccept_head_range(File, N, Cf, Cl),
    out_noaccept_body(File, S, "Line");
out_noaccept_tran(File, N, {$\n,S}) ->
    out_noaccept_head_1(File, N, $\n),
    out_noaccept_body(File, S, "Line+1");
out_noaccept_tran(File, N, {C,S}) ->
    out_noaccept_head_1(File, N, C),
    out_noaccept_body(File, S, "Line").

out_noaccept_head_1(File, State, Char) ->
    out_head_1(File, State, Char, "Action", "Alen").

out_noaccept_head_max(File, State, Min) ->
    out_head_max(File, State, Min, "Action", "Alen").

out_noaccept_head_range(File, State, Min, Max) ->
    out_head_range(File, State, Min, Max, "Action", "Alen").

out_noaccept_body(File, Next, Line) ->
    out_body(File, Next, Line, "Action", "Alen").

out_head_1(File, State, Char, Action, Alen) ->
    io:fwrite(File, "yystate(~w, [~w|Ics], Line, Tlen, ~s, ~s) ->\n",
              [State,Char,Action,Alen]).

out_head_max(File, State, Min, Action, Alen) ->
    io:fwrite(File, "yystate(~w, [C|Ics], Line, Tlen, ~s, ~s) when C >= ~w ->\n",
              [State,Action,Alen,Min]).

out_head_range(File, State, Min, Max, Action, Alen) ->
    io:fwrite(File, "yystate(~w, [C|Ics], Line, Tlen, ~s, ~s) when C >= ~w, C =< ~w ->\n",
              [State,Action,Alen,Min,Max]).

out_body(File, Next, Line, Action, Alen) ->
    io:fwrite(File, "    yystate(~w, Ics, ~s, Tlen+1, ~s, ~s);\n",
              [Next,Line,Action,Alen]).

%% pack_trans([{Crange,State}]) -> [{Crange,State}] when
%%      Crange = {Char,Char} | Char.
%%  Pack the translation table into something more suitable for
%%  generating code. We KNOW how the pattern matching compiler works
%%  so solitary characters are stored before ranges. We do this by
%%  prepending singletons to the front of the packed transitions and
%%  appending ranges to the back. This preserves the smallest to
%%  largest order of ranges. Newline characters, $\n, are always
%%  extracted and handled as singeltons.

pack_trans(Trs) -> pack_trans(Trs, []).

%% pack_trans(Trs) ->
%%     Trs1 = pack_trans(Trs, []),
%%     io:fwrite("tr:~p\n=> ~p\n", [Trs,Trs1]),
%%     Trs1.

pack_trans([{{C,C},S}|Trs], Pt) ->         % Singletons to the head
    case lists:member({C,S}, Pt) of
        true -> pack_trans(Trs, Pt);
        false -> pack_trans(Trs, [{C,S}|Pt])
    end;
%% Special detection and handling of $\n.
pack_trans([{{Cf,$\n},S}|Trs], Pt) ->
    pack_trans([{{Cf,$\n-1},S}|Trs], [{$\n,S}|Pt]);
pack_trans([{{$\n,Cl},S}|Trs], Pt) ->
    pack_trans([{{$\n+1,Cl},S}|Trs], [{$\n,S}|Pt]);
pack_trans([{{Cf,Cl},S}|Trs], Pt) when Cf < $\n, Cl > $\n ->
    pack_trans([{{Cf,$\n-1},S},{{$\n+1,Cl},S}|Trs], [{$\n,S}|Pt]);
%% Small ranges become singletons.
pack_trans([{{Cf,Cl},S}|Trs], Pt) when Cl =:= Cf + 1 ->
    pack_trans(Trs, [{Cf,S},{Cl,S}|Pt]);
pack_trans([Tr|Trs], Pt) ->                % The default uninteresting case
    pack_trans(Trs, Pt ++ [Tr]);
pack_trans([], Pt) -> Pt.

%% out_actions(File, XrlFile, ActionList) -> ok.
%% Write out the action table.

out_actions(File, XrlFile, As) ->
    As1 = prep_out_actions(As),
    foreach(fun (A) -> out_action(File, A) end, As1),
    io:fwrite(File, "yyaction(_, _, _, _) -> error.~n", []),
    foreach(fun (A) -> out_action_code(File, XrlFile, A) end, As1).

prep_out_actions(As) ->
    map(fun ({A,empty_action}) ->
                {A,empty_action};
            ({A,Code,TokenChars,TokenLen,TokenLine}) ->
                Vs = [{TokenChars,"TokenChars"},
                      {TokenLen,"TokenLen"},
                      {TokenLine,"TokenLine"},
                      {TokenChars,"YYtcs"},
                      {TokenLen or TokenChars,"TokenLen"}],
                Vars = [if F -> S; true -> "_" end || {F,S} <- Vs],
                Name = list_to_atom(lists:concat([yyaction_,A])),
                [Chars,Len,Line,_,_] = Vars,
                Args = [V || V <- [Chars,Len,Line], V =/= "_"],
                ArgsChars = lists:join(", ", Args),
                {A,Code,Vars,Name,Args,ArgsChars}
        end, As).

out_action(File, {A,empty_action}) ->
    io:fwrite(File, "yyaction(~w, _, _, _) -> skip_token;~n", [A]);
out_action(File, {A,_Code,Vars,Name,_Args,ArgsChars}) ->
    [_,_,Line,Tcs,Len] = Vars,
    io:fwrite(File, "yyaction(~w, ~s, ~s, ~s) ->~n", [A,Len,Tcs,Line]),
    if
        Tcs =/= "_" ->
            io:fwrite(File, "    TokenChars = yypre(YYtcs, TokenLen),~n", []);
        true -> ok
    end,
    io:fwrite(File, "    ~s(~s);~n", [Name, ArgsChars]).

out_action_code(_File, _XrlFile, {_A,empty_action}) ->
    ok;
out_action_code(File, XrlFile, {_A,Code,_Vars,Name,Args,ArgsChars}) ->
    %% Should set the file to the .erl file, but instead assumes that
    %% ?LEEXINC is syntactically correct.
    io:fwrite(File, "\n-compile({inline,~w/~w}).\n", [Name, length(Args)]),
    L = erl_scan:line(hd(Code)),
    output_file_directive(File, XrlFile, L-2),
    io:fwrite(File, "~s(~s) ->~n", [Name, ArgsChars]),
    io:fwrite(File, "    ~ts\n", [pp_tokens(Code, L, File)]).

%% pp_tokens(Tokens, Line, File) -> [char()].
%%  Prints the tokens keeping the line breaks of the original code.

pp_tokens(Tokens, Line0, File) -> pp_tokens(Tokens, Line0, File, none).
    
pp_tokens([], _Line0, _, _) -> [];
pp_tokens([T | Ts], Line0, File, Prev) ->
    Line = erl_scan:line(T),
    [pp_sep(Line, Line0, Prev, T),
     pp_symbol(T, File) | pp_tokens(Ts, Line, File, T)].

pp_symbol({var,_,Var}, _) -> atom_to_list(Var);
pp_symbol({_,_,Symbol}, File) -> format_symbol(Symbol, File);
pp_symbol({dot, _}, _) -> ".";
pp_symbol({Symbol, _}, _) -> atom_to_list(Symbol).

pp_sep(Line, Line0, Prev, T) when Line > Line0 -> 
    ["\n    " | pp_sep(Line - 1, Line0, Prev, T)];
pp_sep(_, _, {'.',_}, _) -> "";        % No space after '.' (not a dot)
pp_sep(_, _, {'#',_}, _) -> "";        % No space after '#'
pp_sep(_, _, {'(',_}, _) -> "";        % No space after '('
pp_sep(_, _, {'[',_}, _) -> "";        % No space after '['
pp_sep(_, _, _, {'.',_}) -> "";        % No space before '.'
pp_sep(_, _, _, {'#',_}) -> "";        % No space before '#'
pp_sep(_, _, _, {',',_}) -> "";        % No space before ','
pp_sep(_, _, _, {')',_}) -> "";        % No space before ')'
pp_sep(_, _, _, _) -> " ".

%% out_dfa_graph(LeexState, DFA, DfaStart) -> ok | error.
%%  Writes the DFA to a .dot file in DOT-format which can be viewed
%%  with Graphviz.

out_dfa_graph(St, DFA, DF) ->
    verbose_print(St, "Writing DFA to file ~ts, ", [St#leex.gfile]),
    case file:open(St#leex.gfile, [write]) of
        {ok,Gfile} ->
            try
                %% Set the same encoding as infile:
                set_encoding(St, Gfile),
                io:fwrite(Gfile, "digraph DFA {~n", []),
                out_dfa_states(Gfile, DFA, DF),
                out_dfa_edges(Gfile, DFA),
                io:fwrite(Gfile, "}~n", []),
                verbose_print(St, "ok~n", []),
                St
            after ok = file:close(Gfile)
            end;
        {error,Error} ->
            verbose_print(St, "error~n", []),
            add_error({none,leex,{file_error,Error}}, St)
    end.

out_dfa_states(File, DFA, DF) ->
    foreach(fun (S) -> out_dfa_state(File, DF, S) end, DFA),
    io:fwrite(File, "~n", []).

out_dfa_state(File, DF, #dfa_state{no=DF, accept={accept,_}}) ->
    io:fwrite(File, "  ~b [shape=doublecircle color=green];~n", [DF]);
out_dfa_state(File, DF, #dfa_state{no=DF, accept=noaccept}) ->
    io:fwrite(File, "  ~b [shape=circle color=green];~n", [DF]);
out_dfa_state(File, _, #dfa_state{no=S, accept={accept,_}}) ->
    io:fwrite(File, "  ~b [shape=doublecircle];~n", [S]);    
out_dfa_state(File, _, #dfa_state{no=S, accept=noaccept}) ->
    io:fwrite(File, "  ~b [shape=circle];~n", [S]).

out_dfa_edges(File, DFA) ->
    foreach(fun (#dfa_state{no=S,trans=Trans}) ->
                    Pt = pack_trans(Trans),
                    Tdict = foldl(fun ({Cr,T}, D) ->
                                          orddict:append(T, Cr, D)
                                  end, orddict:new(), Pt),
                    foreach(fun (T) ->
                                    Crs = orddict:fetch(T, Tdict),
                                    Edgelab = dfa_edgelabel(Crs, File),
                                    io:fwrite(File, "  ~b -> ~b [label=\"~ts\"];~n",
                                              [S,T,Edgelab])
                            end, sort(orddict:fetch_keys(Tdict)))
            end, DFA).

dfa_edgelabel([C], File) when is_integer(C) -> quote(C, File);
dfa_edgelabel(Cranges, File) ->
    %% io:fwrite("el: ~p\n", [Cranges]),
    "[" ++ map(fun ({A,B}) -> [quote(A, File), "-", quote(B, File)];
                   (C)     -> [quote(C, File)]
               end, Cranges) ++ "]".

set_encoding(#leex{encoding = none}, File) ->
    ok = io:setopts(File, [{encoding, epp:default_encoding()}]);
set_encoding(#leex{encoding = E}, File) ->
    ok = io:setopts(File, [{encoding, E}]).

output_encoding_comment(_File, #leex{encoding = none}) ->
    ok;
output_encoding_comment(File, #leex{encoding = Encoding}) ->
    io:fwrite(File, <<"%% ~s\n">>, [epp:encoding_to_string(Encoding)]).

output_file_directive(File, Filename, Line) ->
    io:fwrite(File, <<"-file(~ts, ~w).\n">>,
              [format_filename(Filename, File), Line]).

format_filename(Filename0, File) ->
    Filename = filename:flatten(Filename0),
    case enc(File) of
        unicode -> io_lib:write_string(Filename);
        latin1  -> io_lib:write_string_as_latin1(Filename)
    end.

format_symbol(Symbol, File) ->
    Format = case enc(File) of
                 latin1  -> "~p";
                 unicode -> "~tp"
             end,
    io_lib:fwrite(Format, [Symbol]).

enc(File) ->
    case lists:keyfind(encoding, 1, io:getopts(File)) of
	false -> latin1; % should never happen
	{encoding, Enc} -> Enc
    end.

quote($^, _File)  -> "\\^";
quote($., _File)  -> "\\.";
quote($$, _File)  -> "\\$";
quote($-, _File)  -> "\\-";
quote($[, _File)  -> "\\[";
quote($], _File)  -> "\\]";
quote($\s, _File) -> "\\\\s";
quote($\", _File) -> "\\\"";
quote($\b, _File) -> "\\\\b";
quote($\f, _File) -> "\\\\f";
quote($\n, _File) -> "\\\\n";
quote($\r, _File) -> "\\\\r";
quote($\t, _File) -> "\\\\t";
quote($\e, _File) -> "\\\\e";
quote($\v, _File) -> "\\\\v";
quote($\d, _File) -> "\\\\d";
quote($\\, _File) -> "\\\\";
quote(C, File) when is_integer(C) ->
    %% Must remove the $ and get the \'s right.
    S = case enc(File) of
            unicode -> io_lib:write_char(C);
            latin1  -> io_lib:write_char_as_latin1(C)
        end,
    case S of
        [$$,$\\|Cs] -> "\\\\" ++ Cs;
        [$$|Cs] -> Cs
    end;
quote(maxchar, _File) ->
    "MAXCHAR".