/usr/lib/rabbitmq/lib/rabbitmq_server-3.8.8/sbin/ Current File: //usr/lib/rabbitmq/lib/rabbitmq_server-3.8.8/sbin/rabbitmq-server
#!/bin/sh
# vim:sw=4:et:
##  The contents of this file are subject to the Mozilla Public License
##  Version 1.1 (the "License"); you may not use this file except in
##  compliance with the License. You may obtain a copy of the License
##  at https://www.mozilla.org/MPL/
##
##  Software distributed under the License is distributed on an "AS IS"
##  basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
##  the License for the specific language governing rights and
##  limitations under the License.
##
##  The Original Code is RabbitMQ.
##
##  The Initial Developer of the Original Code is GoPivotal, Inc.
##  Copyright (c) 2007-2020 VMware, Inc. or its affiliates.  All rights reserved.
##

set -e

# Get default settings with user overrides for (RABBITMQ_)<var_name>
# Non-empty defaults should be set in rabbitmq-env
SCRIPTS_DIR=$(dirname "$0")
. "$SCRIPTS_DIR/rabbitmq-env"

[ "$NOTIFY_SOCKET" ] && RUNNING_UNDER_SYSTEMD=true

RABBITMQ_DEFAULT_ALLOC_ARGS="+MBas ageffcbf +MHas ageffcbf +MBlmbcs 512 +MHlmbcs 512 +MMmcs 30"

# Bump ETS table limit to 50000
if [ "x" = "x$ERL_MAX_ETS_TABLES" ]; then
    ERL_MAX_ETS_TABLES=50000
fi

# Lazy initialization of threed pool size - if it wasn't set
# explicitly. This parameter is only needed when server is starting,
# so it makes no sense to do this calculations in rabbitmq-env or
# rabbitmq-defaults scripts.
ensure_thread_pool_size() {
    if [ -z "${RABBITMQ_IO_THREAD_POOL_SIZE}" ]; then
        RABBITMQ_IO_THREAD_POOL_SIZE=$(
            erl \
                -noinput \
                -boot "${CLEAN_BOOT_FILE}" \
                -s rabbit_misc report_default_thread_pool_size
        )
    fi
}

check_start_params() {
    check_not_empty RABBITMQ_BOOT_MODULE
    check_not_empty SASL_BOOT_FILE
    check_not_empty RABBITMQ_IO_THREAD_POOL_SIZE
}

check_not_empty() {
    local name="${1:?}"
    local value
    eval value=\$$name
    if [ -z "$value" ]; then
        echo "Error: ENV variable should be defined: $1.
       Please check rabbitmq-env, rabbitmq-defaults, and ${RABBITMQ_CONF_ENV_FILE} script files"
        exit 78
    fi
}

start_rabbitmq_server() {
    set -e

    _rmq_env_set_erl_libs
    ensure_thread_pool_size

    RABBITMQ_START_RABBIT=
    [ "x" = "x$RABBITMQ_ALLOW_INPUT" ] && RABBITMQ_START_RABBIT=" -noinput"
    if test -z "$RABBITMQ_NODE_ONLY"; then
        if test "$USE_RABBIT_BOOT_SCRIPT"; then
            # TODO: This is experimental and undocumented at this point.
            # It is here just to do simple checks while playing with how
            # RabbitMQ is started.
            "$SCRIPTS_DIR/rabbitmq-rel" gen-boot
            SASL_BOOT_FILE=rabbit
            test -f "$SASL_BOOT_FILE.boot"
            RABBITMQ_START_RABBIT="$RABBITMQ_START_RABBIT -init_debug"
        else
            RABBITMQ_START_RABBIT="$RABBITMQ_START_RABBIT -s $RABBITMQ_BOOT_MODULE boot"
        fi
    fi

    # We need to turn off path expansion because some of the vars,
    # notably RABBITMQ_SERVER_ERL_ARGS, contain terms that look like
    # globs and there is no other way of preventing their expansion.
    set -f

    export ERL_MAX_ETS_TABLES \
        SYS_PREFIX

    check_start_params

    exec erl \
        -pa "$RABBITMQ_SERVER_CODE_PATH" \
        ${RABBITMQ_START_RABBIT} \
        -boot "${SASL_BOOT_FILE}" \
        +W w \
        +K true \
        +A ${RABBITMQ_IO_THREAD_POOL_SIZE} \
        ${RABBITMQ_DEFAULT_ALLOC_ARGS} \
        ${RABBITMQ_SERVER_ERL_ARGS} \
        ${RABBITMQ_SERVER_ADDITIONAL_ERL_ARGS} \
        ${RABBITMQ_SERVER_START_ARGS} \
        -lager crash_log false \
        -lager handlers '[]' \
        "$@"
}

stop_rabbitmq_server() {
    if test "$rabbitmq_server_pid"; then
        kill -TERM "$rabbitmq_server_pid"
        wait "$rabbitmq_server_pid" || true
    fi
}

if [ "$RABBITMQ_ALLOW_INPUT" -o "$RUNNING_UNDER_SYSTEMD" -o "$detached" ]; then
    # Run erlang VM directly, completely replacing current shell
    # process - so the pid file written in the code above will be
    # valid (unless detached, which is also handled in the code
    # above).
    #
    # And also this is the correct mode to run the broker under
    # systemd - there is no need in a proxy process that converts
    # signals to graceful shutdown command, the unit file should already
    # contain instructions for graceful shutdown. Also by removing
    # this additional process we could simply use value returned by
    # `os:getpid/0` for a systemd ready notification.
    start_rabbitmq_server "$@"
else
    # When RabbitMQ runs in the foreground but the Erlang shell is
    # disabled, we setup signal handlers to stop RabbitMQ properly. This
    # is at least useful in the case of Docker.
    # The Erlang VM should ignore SIGINT.
    RABBITMQ_SERVER_START_ARGS="${RABBITMQ_SERVER_START_ARGS} ${RABBITMQ_IGNORE_SIGINT_FLAG}"

    # Signal handlers. They all stop RabbitMQ properly, using
    # rabbitmqctl stop. This script will exit with different exit codes:
    #   SIGHUP, SIGTSTP + SIGCONT
    #     Ignored until we implement a useful behavior.
    #   SIGTERM
    #	  Exits 0 since this is considered a normal process termination.
    #   SIGINT
    #     Exits 128 + $signal_number where $signal_number is 2 for SIGINT (see
    #     https://pubs.opengroup.org/onlinepubs/009695399/utilities/kill.html).
    #     This is considered an abnormal process termination. Normally, we
    #     don't need to specify this exit code because the shell propagates it.
    #     Unfortunately, the signal handler doesn't work as expected in Dash,
    #     thus we need to explicitly restate the exit code.
    #
    # The behaviors below should remain consistent with the
    # equivalent signal handlers in the Erlang code
    # (see apps/rabbitmq_prelaunch/src/rabbit_prelaunch_sighandler.erl).
    trap '' HUP TSTP CONT
    trap "stop_rabbitmq_server; exit 0" TERM
    trap "stop_rabbitmq_server; exit 130" INT

    start_rabbitmq_server "$@" &
    export rabbitmq_server_pid=$!

    # Block until RabbitMQ exits or a signal is caught.
    # Waits for last command (which is start_rabbitmq_server)
    #
    # The "|| true" is here to work around an issue with Dash. Normally
    # in a Bourne shell, if `wait` is interrupted by a signal, the
    # signal handlers defined above are executed and the script
    # terminates with the exit code of `wait` (unless the signal handler
    # overrides that).
    # In the case of Dash, it looks like `set -e` (set at the beginning
    # of this script) gets precedence over signal handling. Therefore,
    # when `wait` is interrupted, its exit code is non-zero and because
    # of `set -e`, the script terminates immediately without running the
    # signal handler. To work around this issue, we use "|| true" to
    # force that statement to succeed and the signal handler to properly
    # execute. Because the statement below has an exit code of 0, the
    # signal handler has to restate the expected exit code.
    wait "$rabbitmq_server_pid" || true
fi