/usr/lib/modules/3.10.0-1160.31.1.el7.x86_64/source/arch/arm/mach-ep93xx/

File Upload :
llllll

Current File: //usr/lib/modules/3.10.0-1160.31.1.el7.x86_64/source/arch/arm/mach-ep93xx/Kconfig
if ARCH_EP93XX menu "Cirrus EP93xx Implementation Options" config EP93XX_SOC_COMMON bool default y select LEDS_GPIO_REGISTER config CRUNCH bool "Support for MaverickCrunch" help Enable kernel support for MaverickCrunch. comment "EP93xx Platforms" choice prompt "EP93xx first SDRAM bank selection" default EP93XX_SDCE3_SYNC_PHYS_OFFSET config EP93XX_SDCE3_SYNC_PHYS_OFFSET bool "0x00000000 - SDCE3/SyncBoot" help Select this option if you want support for EP93xx boards with the first SDRAM bank at 0x00000000. config EP93XX_SDCE0_PHYS_OFFSET bool "0xc0000000 - SDCEO" help Select this option if you want support for EP93xx boards with the first SDRAM bank at 0xc0000000. config EP93XX_SDCE1_PHYS_OFFSET bool "0xd0000000 - SDCE1" help Select this option if you want support for EP93xx boards with the first SDRAM bank at 0xd0000000. config EP93XX_SDCE2_PHYS_OFFSET bool "0xe0000000 - SDCE2" help Select this option if you want support for EP93xx boards with the first SDRAM bank at 0xe0000000. config EP93XX_SDCE3_ASYNC_PHYS_OFFSET bool "0xf0000000 - SDCE3/AsyncBoot" help Select this option if you want support for EP93xx boards with the first SDRAM bank at 0xf0000000. endchoice config MACH_ADSSPHERE bool "Support ADS Sphere" depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET help Say 'Y' here if you want your kernel to support the ADS Sphere board. config MACH_EDB93XX bool config MACH_EDB9301 bool "Support Cirrus Logic EDB9301" depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET select MACH_EDB93XX help Say 'Y' here if you want your kernel to support the Cirrus Logic EDB9301 Evaluation Board. config MACH_EDB9302 bool "Support Cirrus Logic EDB9302" depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET select MACH_EDB93XX help Say 'Y' here if you want your kernel to support the Cirrus Logic EDB9302 Evaluation Board. config MACH_EDB9302A bool "Support Cirrus Logic EDB9302A" depends on EP93XX_SDCE0_PHYS_OFFSET select MACH_EDB93XX help Say 'Y' here if you want your kernel to support the Cirrus Logic EDB9302A Evaluation Board. config MACH_EDB9307 bool "Support Cirrus Logic EDB9307" depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET select MACH_EDB93XX help Say 'Y' here if you want your kernel to support the Cirrus Logic EDB9307 Evaluation Board. config MACH_EDB9307A bool "Support Cirrus Logic EDB9307A" depends on EP93XX_SDCE0_PHYS_OFFSET select MACH_EDB93XX help Say 'Y' here if you want your kernel to support the Cirrus Logic EDB9307A Evaluation Board. config MACH_EDB9312 bool "Support Cirrus Logic EDB9312" depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET select MACH_EDB93XX help Say 'Y' here if you want your kernel to support the Cirrus Logic EDB9312 Evaluation Board. config MACH_EDB9315 bool "Support Cirrus Logic EDB9315" depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET select MACH_EDB93XX help Say 'Y' here if you want your kernel to support the Cirrus Logic EDB9315 Evaluation Board. config MACH_EDB9315A bool "Support Cirrus Logic EDB9315A" depends on EP93XX_SDCE0_PHYS_OFFSET select MACH_EDB93XX help Say 'Y' here if you want your kernel to support the Cirrus Logic EDB9315A Evaluation Board. config MACH_GESBC9312 depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET bool "Support Glomation GESBC-9312-sx" help Say 'Y' here if you want your kernel to support the Glomation GESBC-9312-sx board. config MACH_MICRO9 bool config MACH_MICRO9H bool "Support Contec Micro9-High" depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET select MACH_MICRO9 help Say 'Y' here if you want your kernel to support the Contec Micro9-High board. config MACH_MICRO9M bool "Support Contec Micro9-Mid" depends on EP93XX_SDCE3_ASYNC_PHYS_OFFSET select MACH_MICRO9 help Say 'Y' here if you want your kernel to support the Contec Micro9-Mid board. config MACH_MICRO9L bool "Support Contec Micro9-Lite" depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET select MACH_MICRO9 help Say 'Y' here if you want your kernel to support the Contec Micro9-Lite board. config MACH_MICRO9S bool "Support Contec Micro9-Slim" depends on EP93XX_SDCE3_ASYNC_PHYS_OFFSET select MACH_MICRO9 help Say 'Y' here if you want your kernel to support the Contec Micro9-Slim board. config MACH_SIM_ONE bool "Support Simplemachines Sim.One board" depends on EP93XX_SDCE0_PHYS_OFFSET help Say 'Y' here if you want your kernel to support the Simplemachines Sim.One board. config MACH_SNAPPER_CL15 bool "Support Bluewater Systems Snapper CL15 Module" depends on EP93XX_SDCE0_PHYS_OFFSET help Say 'Y' here if you want your kernel to support the Bluewater Systems Snapper CL15 Module. config MACH_TS72XX bool "Support Technologic Systems TS-72xx SBC" depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET help Say 'Y' here if you want your kernel to support the Technologic Systems TS-72xx board. config MACH_VISION_EP9307 bool "Support Vision Engraving Systems EP9307 SoM" depends on EP93XX_SDCE0_PHYS_OFFSET help Say 'Y' here if you want your kernel to support the Vision Engraving Systems EP9307 SoM. choice prompt "Select a UART for early kernel messages" config EP93XX_EARLY_UART1 bool "UART1" config EP93XX_EARLY_UART2 bool "UART2" config EP93XX_EARLY_UART3 bool "UART3" endchoice endmenu endif

Copyright ©2k19 - Hexid | Tex7ure